5 Spools Hydraulic Directional Control Valves
Directional control valves represents a flexible unit construction, the elements of which may be combined into one valve unit as required.
They are available in 5 different sizes, and with parallel, serial, serial/parallel, Load Sensing and Flow Sharing circuitry. In addition, the range includes inlet and intermediate flow control sections with either manual or electro-proportional operators. Where accurate control of speed and actuator position is needed, the valves satisfy the most complex hydraulic circuit requirements.
- Wide choice of hydraulic circuitry and maximum flexibility
- Electrical and mechanical operators can be combined in the same valve
- Spools can be customised with differing metering ranges
- By-pass solenoid valve and manual safety control in order to prevent unauthorised movement of actuators
- Wide range of valve sections with flow control and priority flow control
| Nom. Pressure(MPa) | Max. Pressure(MPa) | Nom. Flow rate(L/min) | Max. Flow rate(L/min) | Back Pressure(MPa) | Tem.Rang(℃) | Visc.Rang(mm2/S) | Filtrating Accuracy(μm) |
|---|---|---|---|---|---|---|---|
| 20 | 31.5 | 80 | 80 | <1 | -20~+80 | 10~400 | <10 |
- Fluid temperature: from -20 to +80 °C
- Viscosity operating range: 15 – 75 mm²/s (cSt)
- Max contamination level: 21/19/16 – ISO 4406:1999 (NAS 1638 class 10)
- Max contamination level for electro-hydraulic applications: 20/18/15 – ISO 4406:1999 (NAS 1638 class 9)
- With operation by manual lever, 2-spool combi-lever, flexible cable
- With spool-activated microswitch
- With ON-OFF solenoid operation
- With hydraulic, pneumatic, proportional hydraulic, electro-hydraulic and proportional electro-hydraulic operation
- With mechanical-release check valves in A/B ports
- With anti-shock and anti-cavitation relief valves in A/B ports
- Flow control sections with either manual or electro-proportional adjustment
- Tractors
- Agricultural machines
- Harvesting machines
- Earth-moving machinery
