TMT Hydraulic Motor

External gear motors in the APM212 series consist of an aluminum or cast iron housing and two gear wheels supported by plain bearings.

The front flange can be the SAE standard, or the British or German OEM patterns.

Particular attention has been focussed on the design of the shaft seal, which is often affected by back-pressures

  • High overall efficiency thanks to optimised hydraulic compensation
  • Optimum quality/price ratio
  • Customised models can be built for specific applications
  • Low maintenance requirements, even in heavy-duty operating conditions
  • Various components and accessories are available for radial/axial loads, integral anti-cavitation valve, etc.
Type Minimum displacement Maximum displacement Maximum continuous oil flow Intermediate maximum output Maximum intermediate pressure drop
TMT 250 cm³/rev- 15.37 in³/rev 630 cm³/rev- 38.39 in³/rev 125/33.0 litres/minute 68 hp / 51 kW 350 bar/5080 psi
TMTU 250 cm³/rev- 15.37 in³/rev 630 cm³/rev- 38.39 in³/rev  125/33.0 litres/minute 68 hp / 51 kW 70 *
TMTW 250 cm³/rev- 15.37 in³/rev 630 cm³/rev- 38.39 in³/rev  125/33.0 litres/minute 68 hp / 51 kW 460 *

• Smooth running over the entire speed range
• Constant operating torque over a wide speed range
• High starting torque
• High return pressure without the use of drain line (High pressure shaft seal)
• High efficiency
• Long life under extreme operating conditions
• Robust and compact design
• High radial and axial bearing capacity
• For applications in both open and closed loop hydraulic systems
• Suitable for a wide variety of hydraulics fluids

  • Forklifts
  • Lawn care machinery
  • Aerial work platforms
  • Winches
  • Harvesters and planting equipment
  • Sweepers
  • Spreaders